NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-4
654: ZTAP-EVT-DENSITYCHANGED The density of a tape volume was
changed to match the DEFINE.
655: ZTAP-EVT-TAPEMODECHANGED
The tape mode of a tape volume was
changed to match the DEFINE.
656: ZTAP-EVT-DENSITYUSED
The density of a tape volume was not
changed to match the DEFINE.
657: ZTAP-EVT-TAPEMODEUSED
The tape mode of a tape volume was not
changed to match the DEFINE.
658: ZTAP-EVT-NOTEXPIRED
The requested tape was mounted in
response to an output request, but the
tape was not expired.
659: ZTAP-EVT-DISMOUNTED
A tape was dismounted from a drive.
660: ZTAP-EVT-SQUEALERSTATUS
A Guardian file-system error has occurred.
661: ZTAP-EVT-CMOPEN
$ZSVR could not open the catalog
manager.
662: ZTAP-EVT-CMWRITEREAD
$ZSVR received a writeread error when
communicating with the MEDIADBM
process.
663: ZTAP-EVT-CMREPLY
MEDIADBM could not process the $ZSVR
request because of a DSM/TC error.
664: ZTAP-EVT-DEMON
$ZSVR could not create the MEDDEM
process because of a file-system error.
665: ZTAP-EVT-CLEANUP
The DSM/TC catalog manager has
successfully finished cleanup processing.
666: ZTAP-EVT-MOUNTCORRECTERR
The wrong tape is mounted on a tape
drive.
667: ZTAP-EVT-SSIOPEN
$ZSVR could not create the SSI process.
668: ZTAP-EVT-SSIWRITEREAD
$ZSVR sent a message to the SSI
process, but a file-system error was
returned.
669: ZTAP-EVT-SSIRETRY
$ZSVR received a nonfatal error from the
ZSSI process.
670: ZTAP-EVT-SSINORETRY
$ZSVR received a nonretryable fatal error
from the ZSSI process.
671: ZTAP-EVT-SSINODRIVE
No tape drive was specified in the
DEFINE, and all tape drives are busy.
672: ZTAP-EVT-SSIMISMATCH
$ZSVR detected a mismatched tape
mounted in an automated cartridge
system.
Table 9-1. Labeled-Tape Server Event Messages (page 4 of 7)
Event Number and Symbolic Name Description