NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-5
673: ZTAP-EVT-SSIDISMOUNT $ZSVR could not dismount a tape from a
tape drive in an automated cartridge
system.
674: ZTAP-EVT-SSIWRONGTYPE
$ZSVR detected a mismatched tape type
mounted in an automated cartridge
system.
675: ZTAP-EVT-CMEXCLUDEDPOOL
An application requested a tape volume
residing in an excluded pool but did not
specify a device in the TAPECATALOG
DEFINE.
676: ZTAP-EVT-CMNOSCRATCH
The pool specified in a TAPECATALOG
DEFINE is out of scratch tape volumes
that match the appropriate type.
677: ZTAP-EVT-CMWRONGFILESECT
The FILESECT attribute specified in a
TAPECATALOG DEFINE is incorrect.
678: ZTAP-EVT-CMWRONGVOLUME
The volume name specified in a
TAPECATALOG DEFINE was not used for
the specified FILEID.
679: ZTAP-EVT-CMNOTSCRATCH
The volume name specified in a tape
DEFINE could not be used.
680: ZTAP-EVT-CMNOTASSIGNED
The volume name specified in a tape
DEFINE could not be used because it is
not assigned.
681: ZTAP-EVT-CMNEEDVOLUME
The volume name was not specified in the
TAPECATALOG DEFINE attribute when
writing multifile volume sets (FILESEQ >
1).
682: ZTAP-EVT-CMWRONGFILESEQ
The FILESEQ attribute specified in the
TAPECATALOG DEFINE for the file
identification is incorrect.
683: ZTAP-EVT-CMNOALTAVAILABLE
A MEDIACOM ALTER TAPEMOUNT
command, was attempted but no
alternate copy was available.
684: ZTAP-EVT-SSINOAVR
A tape successfully mounted in an
automated cartridge storage was not
being detected by the tape drive.
685: ZTAP-EVT-CMCONSOLEWRITE
An error occurred during an attempt to
send a message to the DSM/TC console.
686: ZTAP-EVT-LINKDOWN
An error occurred during an attempt to
communicate with a tape drive.
687: ZTAP-EVT-LINKUP
A connection to a tape drive was
reestablished.
Table 9-1. Labeled-Tape Server Event Messages (page 5 of 7)
Event Number and Symbolic Name Description