NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-10
Labeled-Tape Server (ZTAP-) Definitions
Labeled-Tape Server (ZTAP-) Definitions
Labeled-tape server definitions begin with ZTAP- and are found in the source-definition
files ZTAPTAL, ZTAPCOB, ZTAPTACL, ZTAPDDL, ZTAPC, and ZTAPPAS. These
definitions are described in this section.
Topics:

Private Token and Field Types on page 9-10

Predefined Token and Field Values on page 9-10

Simple Tokens and Structured Tokens on page 9-10
Private Token and Field Types
Predefined Token and Field Values
Simple Tokens and Structured Tokens
These tokens are described in the event-message descriptions.
ZTAP-TYP-REVISION type ZSPI-DDL-CHAR3.
ZTAP-TYP-TAPE-VOLUME type ZSPI-DDL-CHAR
occurs 6 times.
ZTAP-TYP-FILEID type ZSPI-DDL-CHAR
occurs 17 times.
Token Description
ZTAP-TYP-REVISION Revision level for a tape controller.
ZTAP-TYP-TAPE-VOLUME Volume serial number for a tape volume.
ZTAP-TYP-FILEID Name of a tape file.
Token Description
ZTAP-VAL-SSID ZSVR subsystem ID—the structure is shown under the
description for ZSPI-TKN-SSID.
ZTAP-VAL-VERSION Version number of the ZSVR subsystem.
ZTAP-VAL-STREAM Indicates streaming tape mode.
ZTAP-VAL-STARTSTOP Indicates start and stop tape mode.
ZTAP-VAL-800BPI Indicates a tape density of 800 bits per inch (not supported in
D-series).
ZTAP-VAL-1600BPI Indicates a tape density of 1600 bits per inch.
ZTAP-VAL-6250BPI Indicates a tape density of 6250 bits per inch.