NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-27
Messages
608: ZTAP-EVT-REQUNKNOWN
A request was made to mount questionable tape on a tape device. The operator must
approve the mounting of this tape.
Unconditional Tokens
Cause. A questionable tape is mounted on a tape device, either the tape that is
mounted is written at a density that the tape drive does not support, or it has never
been written before. The system cannot use automatic volume recognition (AVR) to
read the tape. The operator must approve the mounting of this tape.
Effect. The system waits for a response. The tape remains online, though the
MEDIACOM STATUS command will not show the tapes as being mounted on the
drive.
Subject: ZTAP-TKN-DEV-NAME
Potentially critical event: No
Action event: Yes
Message sender: $ZSVR
TMDS collector: No
OSM/TSM collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-ACTION-ID token-type ZSPI-TYP-INT
ZEMS-TKN-TEXT token-type ZSPI-TYP-STRING
ZTAP-TKN-DEV-NAME token-type ZSPI-TYP-DEVICE
Event-Message Text
$ZSVR: seq UNKNOWN TAPE ON $dev,
ACCEPT OR MOUNT CORRECT TAPE TO PROCEED
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-
REQUNKNOWN (608).
ZEMS-TKN-ACTION-ID $ZSVR internal message number that identifies the
request. This token contains a four-digit number ranging
from 0000 to 9999.
ZEMS-TKN-TEXT Standard EMS token that contains the message text. See
Event Management Service (EMS) Standard Definitions
on
page 9-9.
ZTAP-TKN-DEV-NAME Subject token that specifies the device name.