NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-32
Messages
612: ZTAP-EVT-AVRERR
An AVR error occurred.
Unconditional Tokens
Cause. The specified tape device failed to read a tape volume when a tape volume
was mounted. This failure can indicate a tape device problem, but it can also be
caused by either:

Premounting a blank tape

Setting the density switch on a 5101, 5103, 5105, or 5107 tape drive to a different
value than the density recorded on the tape volume
Effect. The tape is rewound and unloaded.
Subject: ZTAP-TKN-DEV-NAME
Potentially critical event: No
Action event: No
Message sender: $ZSVR
TMDS collector: No
OSM/TSM collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-TEXT token-type ZSPI-TYP-STRING
ZTAP-TKN-DEV-NAME token-type ZSPI-TYP-DEVICE
ZTAP-TKN-ERRMSGNUMBER token-type ZSPI-TYP-UINT
ZTAP-TKN-FSERR token-type ZSPI-TYP-ENUM
Event-Message Text
$tape-device: ERROR 1 - CANNOT PERFORM VOLUME RECOGNITION.
ERROR nnn
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-
AVRERR (612).
ZEMS-TKN-TEXT Standard EMS token that contains the message text. See
Event Management Service (EMS) Standard Definitions
on page 9-9.
ZTAP-TKN-DEV-NAME Subject token that specifies the device name.
ZTAP-TKN-ERRMSGNUMBER Labeled-tape defined error number (1).
ZTAP-TKN-FSERR File-system error number for the operation.