NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-35
Messages
Recovery. Either mount the correct tape volume or, if the volume requested by the
application is not available, abort the operation by rejecting the mount request with
TAPECOM or MEDIACOM.
615: ZTAP-EVT-NOTLTERR
The mounted tape volume is not a labeled tape.
Unconditional Tokens
Cause. The mounted tape volume is not a labeled tape, as requested by the
application.
Effect. The system unloads the tape, and the requesting application is suspended
until the correct tape is mounted.
Recovery. Mount the correct tape volume and continue.
Subject: ZTAP-TKN-DEV-NAME
Potentially critical event: No
Action event: No
Message sender: $ZSVR
TMDS collector: No
OSM/TSM collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-TEXT token-type ZSPI-TYP-STRING
ZTAP-TKN-DEV-NAME token-type ZSPI-TYP-DEVICE
ZTAP-TKN-ERRMSGNUMBER token-type ZSPI-TYP-UINT
ZTAP-TKN-TAPE-VOLUME token-type ZTAP-TYP-TAPE-VOLUME
Event-Message Text
ERROR 4 - WRONG TAPE, NOT LABELED, SHOULD BE vid
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-
NOTLTERR (615).
ZEMS-TKN-TEXT Standard EMS token that contains the message text. See
Event Management Service (EMS) Standard Definitions
on page 9-9.
ZTAP-TKN-DEV-NAME Subject token that specifies the device name.
ZTAP-TKN-ERRMSGNUMBER Labeled-tape defined error number (4).
ZTAP-TKN-TAPE-VOLUME Subject token that specifies the volume serial number of
the correct volume to use.