NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-37
Messages
617: ZTAP-EVT-USEIBMTAPEERR
An IBM labeled tape was requested, but the mounted tape volume is an ANSI labeled
tape.
Unconditional Tokens
Cause. An IBM labeled tape was requested, but the mounted tape volume is an ANSI
labeled tape.
Effect. The system unloads the tape, and the requesting application is suspended
until the correct IBM labeled tape is mounted.
Recovery. Mount an IBM labeled tape to satisfy the request or change the DEFINE
attribute to indicate the correct type of tape, and then retry the operation.
Subject: ZTAP-TKN-DEV-NAME
Potentially critical event: No
Action event: No
Message sender: $ZSVR
TMDS collector: No
OSM/TSM collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-TEXT token-type ZSPI-TYP-STRING
ZTAP-TKN-DEV-NAME token-type ZSPI-TYP-DEVICE
ZTAP-TKN-ERRMSGNUMBER token-type ZSPI-TYP-UINT
ZTAP-TKN-ERRTAPEVOLUME token-type ZTAP-TYP-TAPE-VOLUME
Event-Message Text
ERROR 6 - VOLUME vid IS ANSI TAPE, NOT IBM TAPE AS REQUIRED
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-
USEIBMTAPEERR (617).
ZEMS-TKN-TEXT Standard EMS token that contains the message text. See
Event Management Service (EMS) Standard Definitions
on page 9-9.
ZTAP-TKN-DEV-NAME Subject token that specifies the device name.
ZTAP-TKN-ERRMSGNUMBER Labeled-tape defined error number (6).
ZTAP-TKN-ERRTAPEVOLUME Volume serial number of the volume in error.