NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-43
Messages
623: ZTAP-EVT-USETMFNOTANSIERR
A tape device expected a TMF labeled tape, but the mounted tape was an ANSI
labeled tape.
Unconditional Tokens
Cause. The mounted tape volume is an ANSI labeled tape. Use a TMF labeled tape
instead.
Effect. The system unloads the tape, and the requesting application is suspended
until the correct type of tape is mounted.
Recovery. Use TMFCOM to create a TMF tape, then retry the operation.
Subject: ZTAP-TKN-DEV-NAME
Potentially critical event: No
Action event: No
Message sender: $ZSVR
TMDS collector: No
OSM/TSM collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-TEXT token-type ZSPI-TYP-STRING
ZTAP-TKN-DEV-NAME token-type ZSPI-TYP-DEVICE
ZTAP-TKN-ERRMSGNUMBER token-type ZSPI-TYP-UINT
ZTAP-TKN-ERRTAPEVOLUME token-type ZTAP-TYP-TAPE-VOLUME.
Event-Message Text
ERROR 12 - VOLUME vid IS ANSI TAPE, NOT TMF TAPE AS REQUESTED
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-
USETMFNOTANSIERR (623).
ZEMS-TKN-TEXT Standard EMS token that contains the message text. See
Event Management Service (EMS) Standard Definitions
on page 9-9.
ZTAP-TKN-DEV-NAME Subject token that specifies the device name.
ZTAP-TKN-ERRMSGNUMBER Labeled-tape defined error number (12)
ZTAP-TKN-ERRTAPEVOLUME Volume serial number of the mounted tape.