NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-48
Messages
Recovery. Correct the DEFINE value indicated in the ZTAP-TKN-BADNUM token. If
the DEFINE value is correct (within the allowable range), make a note of this event
message and see Recovery Action Requiring Vendor Support on page 9-12.
629: ZTAP-EVT-USESCRATCHERR
The mounted tape is an unlabeled tape, but a scratch tape was requested.
Unconditional Tokens
Cause. The mounted tape is an unlabeled tape, but the application requested a
scratch tape.
Effect. The system unloads the tape, and the requesting application is suspended
until the correct tape is mounted.
Recovery. Mount a scratch tape, then retry the operation.
Subject: ZTAP-TKN-DEV-NAME
Potentially critical event: No
Action event: No
Message sender: $ZSVR
TMDS collector: No
OSM/TSM collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-TEXT token-type ZSPI-TYP-STRING
ZTAP-TKN-DEV-NAME token-type ZSPI-TYP-DEVICE
ZTAP-TKN-ERRMSGNUMBER token-type ZSPI-TYP-UINT
Event-Message Text
ERROR 18 - WRONG TAPE, NOT LABELED, USE SCRATCH TAPE
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-
USESCRATCHERR (629).
ZEMS-TKN-TEXT Standard EMS token that contains the message text. See
Event Management Service (EMS) Standard Definitions
on page 9-9.
ZTAP-TKN-DEV-NAME Subject token that specifies the device name.
ZTAP-TKN-ERRMSGNUMBER Labeled-tape defined error number (18).