NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-73
Messages
654: ZTAP-EVT-DENSITYCHANGED
The tape density specified in the DEFINE for a tape is different from the existing
density of the volume. Data is written at the density requested in the DEFINE.
Unconditional Tokens
Subject: ZTAP-TKN-DEV-NAME
Potentially critical event: No
Action event: No
Message sender: $ZSVR
TMDS collector: No
OSM/TSM collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZTAP-TKN-DEV-NAME token-type ZSPI-TYP-DEVICE
ZEMS-TKN-TEXT token-type ZSPI-TYP-STRING
ZTAP-TKN-WRNMSGNUMBER token-type ZSPI-TYP-INT
ZTAP-TKN-TAPE-VOLUME token-type ZTAP-TYP-TAPE-VOLUME
ZTAP-TKN-NEW-DENSITY token-type ZSPI-TYP-INT
ZTAP-TKN-OLD-DENSITY token-type ZSPI-TYP-INT
Event-Message Text
WARNING 904 - VOLUME vid DENSITY CHANGED TO nnn FROM nnn
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-
DENSITYCHANGED (654).
ZTAP-TKN-DEV-NAME Subject token that specifies the tape drive device name
in the system.
ZEMS-TKN-TEXT Standard EMS token that contains the message text.
See Event Management Service (EMS) Standard
Definitions on page 9-9.
ZTAP-TKN-WRNMSGNUMBER $ZSVR warning message number (904).
ZTAP-TKN-TAPE-VOLUME Subject token that specifies the volume serial number of
the tape volume.
ZTAP-TKN-NEW-DENSITY Tape density that will be used. Values are ZTAP-VAL-
800BPI, ZTAP-VAL-1600BPI, and ZTAP-VAL-6250BPI.
ZTAP-TKN-OLD-DENSITY Old tape density. Values are ZTAP-VAL-800BPI, ZTAP-
VAL-1600BPI, and ZTAP-VAL-6250BPI.