NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-74
Messages
Cause. The first file is being written to a tape volume on a tape drive on which the
tape density can be set programmatically (5106 or 5130), and the tape density
specified in the DEFINE for the tape is different from the existing tape density of the
volume.
This warning message is displayed only when a volume is open for output.
Effect. Data is written at the density specified in the DEFINE.
Recovery. This is a warning message only. Consider changing the DEFINE.
655: ZTAP-EVT-TAPEMODECHANGED
The tape mode specified in the DEFINE for a tape is different from the existing tape
mode of the volume. The volume’s tape mode is changed to the mode specified in the
DEFINE.
Unconditional Tokens
Subject: ZTAP-TKN-DEV-NAME
Potentially critical event: No
Action event: No
Message sender: $ZSVR
TMDS collector: No
OSM/TSM collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZTAP-TKN-DEV-NAME token-type ZSPI-TYP-DEVICE
ZEMS-TKN-TEXT token-type ZSPI-TYP-STRING
ZTAP-TKN-WRNMSGNUMBER token-type ZSPI-TYP-INT
ZTAP-TKN-TAPE-VOLUME token-type ZTAP-TYP-TAPE-VOLUME
ZTAP-TKN-NEW-TAPEMODE token-type ZSPI-TYP-INT
ZTAP-TKN-OLD-TAPEMODE token-type ZSPI-TYP-INT
Event-Message Text
WARNING 905 - VOLUME vid CHANGED TO aaa FROM bbb
Token Description (page1of2)
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-
TAPEMODECHANGED (655).
ZTAP-TKN-DEV-NAME Subject token that specifies the tape drive device name
in the system.
ZEMS-TKN-TEXT Standard EMS token that contains the message text. See
Event Management Service (EMS) Standard Definitions
on page 9-9.