NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-75
Messages
Cause. The first file is being written to a tape volume on a 5120 cartridge tape driver,
and the tape mode (STREAM or STARTSTOP) specified in the DEFINE for the tape is
different from the existing tape mode of the volume.
This message is displayed only when a volume is opened for output.
Effect. The volume’s tape mode is changed to the mode specified in the DEFINE.
Recovery. This is a warning message only. Consider changing the DEFINE.
656: ZTAP-EVT-DENSITYUSED
The tape density specified in the TAPE DEFINE for a labeled tape is different from the
existing density of the volume. The existing density of the volume is used.
ZTAP-TKN-WRNMSGNUMBER $ZSVR warning message number (905).
ZTAP-TKN-TAPE-VOLUME Subject token that specifies the volume serial number of
the tape volume.
ZTAP-TKN-NEW-TAPEMODE Tape mode being used. Values are either ZTAP-VAL-
STREAM or ZTAP-VAL-STARTSTOP.
ZTAP-TKN-OLD-TAPEMODE Old tape mode. Values are either ZTAP-VAL-STREAM or
ZTAP-VAL-STARTSTOP.
Subject: ZTAP-TKN-DEV-NAME
Potentially critical event: No
Action event: No
Message sender: $ZSVR
TMDS collector: No
OSM/TSM collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZTAP-TKN-DEV-NAME token-type ZSPI-TYP-DEVICE
ZEMS-TKN-TEXT token-type ZSPI-TYP-STRING
ZTAP-TKN-WRNMSGNUMBER token-type ZSPI-TYP-INT
ZTAP-TKN-TAPE-VOLUME token-type ZTAP-TYP-TAPE-VOLUME
ZTAP-TKN-USED-DENSITY token-type ZSPI-TYP-INT
ZTAP-TKN-REQD-DENSITY token-type ZSPI-TYP-INT
Event-Message Text
WARNING 906 - VOLUME vid IS DENSITY nnn INSTEAD OF nnn
Token Description (page2of2)