NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-93
Messages
Recovery. This is an informational message only; no corrective action is needed. In
order to use this tape in the ACS, the tape must be relabeled using the MEDIACOM
ADD TAPELABEL command. For more information on this error, see the DSM/Tape
Catalog Management Programming Manual. For further assistance, see Recovery
Action Requiring Vendor Support on page 9-12.
673: ZTAP-EVT-SSIDISMOUNT
The $ZSVR process could not dismount a tape from a tape drive in an ACS.
Unconditional Tokens
Cause. $ZSVR could not dismount a tape from a tape drive in an ACS. See the
message log for more information.
Effect. The tape volume might still be loaded on the tape drive.
Subject: ZTAP-TKN-PROCESS
Potentially critical event: No
Action event: No
Message sender: $ZSVR
TMDS collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-ACTION-NEEDED token-type ZSPI-TYP-BOOLEAN
ZEMS-TKN-ACTION-ID token-type ZSPI-TYP-INT
ZTAP-TKN-PROCESS token-type ZSPI-TYP-CRTPID
ZTAP-TKN-ERRMSGNUMBER token-type ZSPI-TYP-UINT
ZTAP-TKN-TAPE-VOLUME token-type ZTAP-TYP-TAPE-VOLUME
Event-Message Text
ERROR 1015 - DISMOUNT OF ACS TAPE, volser, FAILED
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-
SSIDISMOUNT (673).
ZEMS-TKN-ACTION-NEEDED Has the value ZSPI-VAL-FALSE.
ZEMS-TKN-ACTION-ID $ZSVR internal message number that identifies the
request. This token contains a four-digit number ranging
from 0000 through 9999.
ZTAP-TKN-PROCESS Subject token that specifies the process for this event.
ZTAP-TKN-ERRMSGNUMBER Labeled-tape defined error number (1015).
ZTAP-TKN-TAPE-VOLUME Subject token that specifies the volume serial number of
the correct volume to use.