NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-131
Messages
Recovery. If a third-party tape manager is to be used:
1. Verify that the MEDIADEFS level is INTEGRATED, TPTM, or TPTMCOMPATIBLE.
2. Stop the TPTM process, if it is running.
3. Start the TPTM process.
If a third-party tape manager is not to be used, verify that the MEDIADEFS level is
NOT INTEGRATED, TPTM, or TPTMCOMPATIBLE.
713: ZTAP-EVT-SSIDRIVEBUSY
The ACS drive specified in DEFINE is currently busy.
Unconditional Tokens
Cause. When device is specified in DEFINE during the tape switch, BACKUP might
reopen the DEFINE internally before the previous dismount operation is completed.
Effect. After the tape switch, BACKUP does not proceed until the drive completes the
previously initiated dismount operation. After the drive is free, the BACKUP operation
is completed.
Subject: ZTAP-TKN-DEV-NAME
Potentially critical event: No
Action event: No
Message sender: $ZSVR
TMDS collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-ACTION-NEEDED token-type ZSPI-TYP-BOOLEAN
ZEMS-TKN-ACTION-ID token-type ZSPI-TYP-INT
ZTAP-TKN-DEV-NAME token-type ZSPI-TYP-DEVICE
Event-Message Text
STATUS 1520 - ACS DRIVE drive is busy, will retry the
continuation
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-
SSIDRIVEBUSY (713).
ZEMS-TKN-ACTION-NEEDED Has the value ZSPI-VAL-FALSE.
ZEMS-TKN-ACTION-ID $ZSVR internal message number that identifies the
request. This token contains a four-digit number ranging
from 0000 through 9999.
ZTAP-TKN-DEV-NAME Subject token that specifies the device name.