NonStop Operating System Event Management Programming Manual

Tape Process Event Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
10-3
97: ZTAP-EVT-SYN-MD-STRUCT-ERR A module driver structure error
occurred.
98: ZTAP-EVT-SYN-MD-MB-SM-ERR
A module driver structure error
occurred.
99: ZTAP-EVT-SYN-MD-CONFIG-ERR
A module driver configuration error
occurred.
100: ZTAP-EVT-WRITE-RETRIED
A tape write operation was retried.
101: ZTAP-EVT-READ-RETRIED
A tape read operation was retried.
102: ZTAP-EVT-3202-WRITE-RETRIED
A 3202 controller successfully retried
a tape write operation.
103: ZTAP-EVT-3202-READ-RETRIED
A 3202 controller successfully retried
a tape read operation.
104: ZTAP-EVT-3202-WFM-RETRIED
A 3202 controller successfully retried
a tape write-file-mark operation.
128: ZTAP-EVT-SYN-TNET-SVC-IF-ERR
A ServerNet services interface error
occurred.
129: ZTAP-EVT-SYN-TNET-CPU-TIMEOUT
A ServerNet services processor
timeout error occurred.
130: ZTAP-EVT-SYN-TNET-NO-AVT
A ServerNet services Address
Validation and Translation (AVT) table
error occurred.
131: ZTAP-EVT-SYN-TNET-CPU-RCV-ERR
A ServerNet services processor
receive operation error occurred.
132: ZTAP-EVT-SYN-TNET-CTLR-HW-ERR
A ServerNet services controller
hardware error occurred.
133: ZTAP-EVT-SYN-TNET-CTLR-HAD-ERR
A ServerNet services controller
hardware error occurred.
134: ZTAP-EVT-SYN-TNET-PATH-DOWN
A ServerNet services controller
hardware error occurred.
135: ZTAP-EVT-SYN-TNET-POWER-FAIL
A ServerNet services power failure
occurred.
136: ZTAP-EVT-SYN-TNET-BUF-INVALID
A ServerNet services buffer error
occurred.
137: ZTAP-EVT-SYN-TNET-CTLR-AVT-ERR
A ServerNet services controller AVT
error occurred.
192: ZTAP-EVT-SYN-DEV-SEL-TIMEOUT
A tape device could not be selected.
193: ZTAP-EVT-SYN-DEV-CMD-TIMEOUT
A command operation to a tape
device timed out.
Table 10-1. Tape Process Event Messages (page 3 of 7)
Event Number and Symbolic Name Description