NonStop Operating System Event Management Programming Manual

Tape Process Event Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
10-26
Messages
-1021: ZTAP-EVT-INT-TIMEOUT-CMN
An interrupt time-out has been detected.
Unconditional Tokens
Subject: ZTAP-TKN-DEV-NAME
Potentially critical event: No
Action event: No
Message sender: Tape process
OSM/TSM collector: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-ENUM
ZTAP-TKN-DEV-NAME token-type ZSPI-TYP-DEVICE
ZEMS-TKN-XLDEVNAME token-type ZSPI-TYP-STRING
ZEMS-TKN-COMMAND token-type ZSPI-TDT-UINT
ZEMS-TKN-MAP-PHYSICAL-ADDRESS.
ZEMS-DDL-PHYSICAL-ADDRESS.
ZPA-GROUP token-type ZSPI-DDL-INT2
ZEMS-TKN-MAP-PHYSICAL-ADDRESS.
ZEMS-DDL-PHYSICAL-ADDRESS.
ZPA-MODULE token-type ZSPI-DDL-INT2
ZEMS-TKN-MAP-PHYSICAL-ADDRESS.
ZEMS-DDL-PHYSICAL-ADDRESS.
ZPA-SLOT token-type ZSPI-DDL-INT2
ZEMS-TKN-SCSI-TARGET-ID token-type ZSPI-TYP-INT4
ZEMS-TKN-SCSI-LUN token-type ZSPI-TYP-INT4
ZEMS-TKN-SERVERNET-FABRIC token-type ZEMS-TYP-
SERVERNET-FABRIC
ZEMS-TKN-SAC-NAME token-type ZSPI-TYP-INT4
Event-Message Text
dev-name INTERRUPT TIMED OUT, LDEV $ldev, ON COMMAND Hcommand
PHYS ADDR: GROUP group,MODULER module, SLOT slot,
TARGET ID scsi-target-id,LUN scsi-lun, FABRIC fabric,
SAC NAME sac-name
Token Description (page 1 of 2)
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-
INT-TIMEOUT-CMN (-1021).
ZTAP-TKN-DEV-NAME Subject token that specifies the name of the tape
device.
ZEMS-TKN-XLDEVNAME Subject token that specifies the logical device name of
the subsystem process that reports the event.
ZEMS-TKN-COMMAND Command number for this event.