NonStop Operating System Event Management Programming Manual

Tape Process Event Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
10-28
Messages
Unconditional Tokens
Cause. A power-on (PON) interrupt (indicating a power failure) occurred. The state of
the hardware can be changed by a power failure and a subsequent power on.
ZEMS-TKN-MAP-PHYSICAL-ADDRESS.
ZEMS-DDL-PHYSICAL-ADDRESS.
ZPA-MODULE token-type ZSPI-DDL-INT2
ZEMS-TKN-MAP-PHYSICAL-ADDRESS.
ZEMS-DDL-PHYSICAL-ADDRESS.
ZPA-SLOT token-type ZSPI-DDL-INT2
ZEMS-TKN-SCSI-TARGET-ID token-type ZSPI-TYP-INT4
ZEMS-TKN-SCSI-LUN token-type ZSPI-TYP-INT4
ZEMS-TKN-SERVERNET-FABRIC token-type ZEMS-TYP-
SERVERNET-FABRIC
ZEMS-TKN-SAC-NAME token-type ZSPI-TYP-INT4
Event-Message Text
dev-name PON INTERRUPT OCCURRED, LDEV $ldev,
PHYS ADDR: GROUP group,MODULER module, SLOT slot,
TARGET ID scsi-target-id,LUN scsi-lun, FABRIC fabric,
SAC NAME sac-name
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-
PON-CMN (-1020).
ZTAP-TKN-DEV-NAME Subject token that specifies the name of the tape
device.
ZEMS-TKN-XLDEVNAME Subject token that specifies the logical device of the
subsystem process that reports the event.
ZEMS-TKN-MAP-PHYSICAL-
ADDRESS.ZEMS-DDL-
PHYSICAL-ADDRESS.ZPA-
GROUP
Nonshared group token that is reserved for the vendor.
ZEMS-TKN-MAP-PHYSICAL-
ADDRESS.ZEMS-DDL-
PHYSICAL-ADDRESS.ZPA-
MODULE
Nonshared module token that is reserved for the
vendor.
ZEMS-TKN-MAP-PHYSICAL-
ADDRESS.ZEMS-DDL-
PHYSICAL-ADDRESS.ZPA-SLOT
Nonshared slot token that is reserved for the vendor.
ZEMS-TKN-SCSI-TARGET-ID Nonshared token that is reserved for the vendor.
ZEMS-TKN-SCSI-LUN Nonshared token that is reserved for the vendor.
ZEMS-TKN-SERVERNET-FABRIC Nonshared token that is reserved for the vendor.
ZEMS-TKN-SAC-NAME Nonshared token that is reserved for the vendor.