NonStop Operating System Event Management Programming Manual

Tape Process Event Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
10-29
Messages
Effect. Microcode is reloaded for all downloadable ServerNet addressable (SACs)
controllers for which the processor where the power failed was the primary processor.
Recovery. This is an informational message only; no corrective action is needed.
-1019: ZTAP-EVT-ERROR-INJECTION
An error was injected by an external program.
Unconditional Tokens
Cause. An error was injected by an external program.
Effect. The MD has injected an error to comply with the request.
Recovery. This is an informational message only; no corrective action is needed.
Subject: ZTAP-TKN-DEV-NAME
Potentially critical event: No
Action event: No
Message sender: Tape process
OSM/TSM collector: Yes
Unconditional Tokens
ZTAP-TKN-DEV-NAME token-type ZSPI-DEVICE
ZEMS-TKN-XLDEVNAME token-type ZSPI-TYP-STRING
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-ENUM
Event-Message Text
dev-name ERROR INJECTION, LDEV $ldev,
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-
ERROR-INJECTION (-1019).
ZTAP-TKN-DEV-NAME Subject token that specifies the name of the tape device.
ZEMS-TKN-XLDEVNAME Subject token that specifies the logical device name of the
subsystem process that reports the event, including the
node name.