NonStop Operating System Event Management Programming Manual

Tape Process Event Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
10-30
Messages
-1018: ZTAP-EVT-TIMEOUTS-EXCEEDED-CMN
A tape drive reported a that the number of timeouts allocated for an operation was
exceeded.
Unconditional Tokens
Cause. This function is not supported.
Effect. None.
Recovery. None.
-1017: ZTAP-EVT-PATH-SWITCH-CMN
A tape drive reported a path switch.
Subject: ZTAP-TKN-LDEVNUMBER
Potentially critical event: No
Action event: No
Message sender: Tape process
OSM/TSM collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-ENUM
ZEMS-TKN-XLDEVNAME token-type ZSPI-TYP-STRING
ZEMS-TKN-LDEVNUMBER token-type ZSPI-TYP-INT2
Event-Message Text
$tapenn Timeouts exceeded, LDEV $nn
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is
ZTAP-EVT-
TIMEOUTS-EXCEEDED-CMN (-1018).
ZEMS-TKN-XLDEVNAME Subject token that specifies the name of the tape device in
the form $nnnn.
ZEMS-TKN-LDEVNUMBER Subject token that specifies the logical device number in
the form $nn.
Subject: ZTAP-TKN-LDEVNUMBER
Potentially critical event: No
Action event: No
Message sender: Tape process
OSM/TSM collector: Yes