NonStop Operating System Event Management Programming Manual

Tape Process Event Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
10-31
Messages
Unconditional Tokens
Cause. The drive reported an internally- or externally-initiated path switch.
Effect. None.
Recovery. This is an informational message only; no corrective action is needed.
-1016: ZTAP-EVT-PATH-STATE-CHANGE
The state of a path has changed to a new state.
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-ENUM
ZEMS-TKN-XLDEVNAME token-type ZSPI-TYP-STRING
ZEMS-TKN-LDEVNUMBER token-type ZSPI-TYP-INT2
Event-Message Text
$tapenn Path switch, LDEV $nn
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-PATH-
SW-CMN (-1017).
ZEMS-TKN-XLDEVNAME Subject token that specifies the name of the tape device in
the form $nnnn.
ZEMS-TKN-LDEVNUMBER Subject token that specifies the logical device number in
the form $nn.
Subject: ZTAP-TKN-DEV-NAME
Potentially critical event: No
Action event: No
Message sender: Tape process
OSM/TSM collector: Yes
Unconditional Tokens
ZTAP-TKN-DEV-NAME token-type ZSPI-TYP-DEVICE
ZEMS-TKN-XLDEVNAME token-type ZSPI-TYP-STRING
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-ENUM
ZEMS-TKN-MAP-PHYSICAL-ADDRESS.
ZEMS-DDL-PHYSICAL-ADDRESS.
ZPA-GROUP token-type ZSPI-DDL-INT2
ZEMS-TKN-MAP-PHYSICAL-ADDRESS.
ZEMS-DDL-PHYSICAL-ADDRESS.
ZPA-MODULE token-type ZSPI-DDL-INT2