NonStop Operating System Event Management Programming Manual

Tape Process Event Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
10-33
Messages
-1015: ZTAP-EVT-CPU-SWITCH-CMN
An I/O process was switched to another processor.
Unconditional Tokens
Subject: ZTAP-TKN-DEV-NAME
Potentially critical event: No
Action event: No
Message sender: Tape process
OSM/TSM collector: Yes
Unconditional Tokens
ZTAP-TKN-DEV-NAME token-type ZSPI-TYP-
DEVICE
ZEMS-TKN-XLDEVNAME token-type ZSPI-TYP-
STRING
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-ENUM
ZEMS-TKN-MAP-PHYSICAL-ADDRESS.
ZEMS-DDL-PHYSICAL-ADDRESS.
ZPA-GROUP token-type ZSPI-DDL-INT2
ZEMS-TKN-MAP-PHYSICAL-ADDRESS.
ZEMS-DDL-PHYSICAL-ADDRESS.
ZPA-MODULE token-type ZSPI-DDL-INT2
ZEMS-TKN-MAP-PHYSICAL-ADDRESS.
ZEMS-DDL-PHYSICAL-ADDRESS.
ZPA-SLOT token-type ZSPI-DDL-INT2
ZTAP-TKN-OLD-CPU token-type ZSPI-TYP-UINT
ZTAP-TKN-CHANGE-INITIATOR-CMN token-type ZXYZ-DDL-
CHANGE-INITIATOR
Event-Message Text
dev-name CPU SWITCH, LDEV $ldev,
PHYS ADDR: GROUP group,MODULER module, SLOT slot,
OLD CPU cpu-old,change-initiator, msg-txt
Token Description (page1of2)
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-CPU-
SWITCH-CMN (-1015).
ZTAP-TKN-DEV-NAME Subject token that specifies the name of the tape device.
ZEMS-TKN-XLDEVNAME Subject token that specifies the logical device name of the
subsystem process that reports the event, including the
node name.
EMS-TKN-MAP-PHYSICAL-
ADDRESS.ZEMS-DDL-
PHYSICAL-ADDRESS.ZPA-
GROUP
Nonshared group token that is reserved for the vendor.