NonStop Operating System Event Management Programming Manual

Tape Process Event Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
10-81
Messages
Unconditional Tokens
Cause. An EIO instruction was issued, and the TERMSTAT value returned indicates
that a hard controller error occurred. The TERMSTAT values are:
Effect. The tape operation aborts.
Recovery. If the error continues to occur, see Recovery Action Requiring Vendor
Support on page 10-15.
ZTAP-TKN-EIO-LPRM token-type ZSPI-TYP-UINT
ZTAP-TKN-EIO-RDST token-type ZSPI-TYP-UINT
ZTAP-TKN-EIO-CHANSTAT token-type ZSPI-TYP-UINT
ZTAP-TKN-IIO-RIC token-type ZSPI-TYP-UINT
ZTAP-TKN-IIO-RIST token-type ZSPI-TYP-UINT
ZTAP-TKN-IIO-CHANSTAT token-type ZSPI-TYP-UINT
ZTAP-TKN-IOC-COUNT token-type ZSPI-TYP-UINT
ZTAP-TKN-IOC-RESIDUE token-type ZSPI-TYP-UINT
Event-Message Text
dev-name HARD CONTROLLER ERROR, LDEV $ldev,
SUBCHANNEL ADDRESS %unit-addr
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZTAP-EVT-HARD-
CNTLR-ERROR (204).
ZTAP-TKN-DEV-NAME Subject token that specifies the name of the tape device in
the form $nnnn.
Controller TERMSTAT
3206 102, 103, 105 through 110
3207 102, 103, 105 through 107
3208 (No event)
3209 (No event)
3211 113 through 123, 127 through 136
3214 113 through 123, 127 through 136
3215 113 through 115, 117 through 122,
128 through 132,
135, 136, 139, 141, 142
3681 113 through 123, 127 through 136