NonStop Operating System Event Management Programming Manual

Disk Process Event Messages (ZDSK)
HP NonStop Operating System Event Management Programming Manual—520372-020
11-6
5068: ZDSK-EVT-CBPOOL-USAGE DP2 cannot obtain control block space.
5069: ZDSK-EVT-FCB-TABLE-USE
DP2 cannot obtain control block space.
5070: ZDSK-EVT-OCB-TABLE-USE
DP2 cannot obtain control block space.
5071: ZDSK-EVT-NO-LKTABLE-SPACE
DP2 cannot obtain lock table space.
5072: ZDSK-EVT-LK-TABLE-USE
DP2 cannot obtain lock table space.
5073: ZDSK-EVT-LAB-TABLE-USE
DP2 cannot obtain lock table space.
5074: ZDSK-EVT-LNB-TABLE-USE
DP2 cannot obtain lock table space.
5075: ZDSK-EVT-NO-ACPOOL-SPACE
DP2 cannot obtain checkpoint pool
space.
5076: ZDSK-EVT-ACPOOL-USAGE
DP2 cannot obtain checkpoint pool
space.
5077: ZDSK-EVT-DPSHARE-SIZE
*
Identifies the memory allocated to DP2
cache.
5078: ZDSK-EVT-NO-VIRTUAL-SPACE
A DP2 volume cannot be brought up
because of a failure to acquire sufficient
virtual memory.
5079: ZDSK-EVT-NO-WORKPOOL-SPACE
DP2 failed to allocate space from the
workpool.
5080: ZDSK-EVT-WORKPOOL-USAGE
DP2 failed to allocate space from the
workpool.
5082: ZDSK-EVT-TERMINATED
DP2 volume initialization failed.
5083: ZDSK-EVT-BROTHER-TERMINATED
The backup processor of a DP2 volume
failed to initialize.
5084: ZDSK-EVT-PROCESS-CREATE-TP
DP2 failed in an attempt to create a
tailpin within the same processor.
5085: ZDSK-EVT-PROCESS-CREATE-BK
DP2 failed in an attempt to create the
brother processor headpin.
5086: ZDSK-EVT-RESIZE-FAILED
DP2 received an error during an
attempt to resize virtual memory
segment space.
5087: ZDSK-EVT-ALLOCATE-FAILED
DP2 received an error during an
attempt to allocate virtual memory
segment space.
5088: ZDSK-EVT-CURRENT-STATE
DP2 detected an internal inconsistency
and initiated a processor softdown
state.
5089: ZDSK-EVT-SOFTDOWN-RESET
A softdown processor has been reset
by a PUP UP command
2
or SCF
START command
2
.
Table 11-1. Disk Process Event Messages (page 6 of 9)
* Generated by the DP2 Driver (T9753)