NonStop Operating System Event Management Programming Manual

Disk Process Event Messages (ZDSK)
HP NonStop Operating System Event Management Programming Manual—520372-020
11-32
Messages
Unconditional Tokens
Conditional Tokens
Cause. Any request that has a problem that can be recovered by the I/O driver.
Effect. None.
Recovery. Informational message only; no corrective action is needed.
-1015: ZDSK-EVT-CPU-SWITCH-CMN
A processor switch occurred.
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message.
Value is ZDSK-EVT-RECOVERY-COMPLETION (-
1014).
ZEMS-TKN-XLDEVNAME Subject token that specifies the logical device name
of the affected disk drive.
ZDSK-TKN-RECOVERY-RESULT Recovery result, whether successful or unsuccessful.
Token Description
ZEMS-TKN-LDEVNUMBER The logical device number of the affected disk drive.
ZDSK-TKN-LOGICAL-PATH-CMN Logical path command of the event.
ZEMS-TKN-SAC-NAME Nonshared token that is reserved for the vendor.
ZEMS-TKN-SCSI-TARGET-ID Nonshared token that is reserved for the vendor.
ZEMS-TKN-SCSI-LUN Nonshared token that is reserved for the vendor.
Subject: ZEMS-TKN-XLDEVNAME
Potentially critical event: No
Action event: No
Message sender: Disk process (ZDSK)
$ZLOG: Yes
$0: No
OSM/TSM collector: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-XLDEVNAME token-type ZSPI-TYP-STRING
ZDSK-TKN-CHANGE-INITIATOR-CMN token-type ZSPI-TDT-ENUM
ZDSK-TKN-OLD-CPU token-type ZSPI-TYP-UINT
ZDSK-TKN-NEW-CPU token-type ZSPI-TYP-UINT