NonStop Operating System Event Management Programming Manual

Disk Process Event Messages (ZDSK)
HP NonStop Operating System Event Management Programming Manual—520372-020
11-38
Messages
-1020: ZDSK-EVT-PON-CMN
A power on (PON) interrupt (indicating a power failure) occurred. The state of the
hardware can be changed by a power failure and a subsequent power on.
Unconditional Tokens
Conditional Tokens
Cause. A power on (PON) interrupt (indicating a power failure) occurred. The state of
the hardware can be changed by a power failure and a subsequent power on.
Effect. Microcode is reloaded for all downloadable ServerNet addressable primary
controllers in the processor where the power failed.
Recovery. Informational message only; no corrective action is needed.
Subject: ZEMS-TKN-XLDEVNAME
Potentially critical event: No
Action event: No
Message sender: Disk process (ZDSK)
$ZLOG: Yes
$0: No
OSM/TSM collector: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-XLDEVNAME token-type ZSPI-TYP-STRING
Conditional Tokens
ZEMS-TKN-LDEVNUMBER token-type ZSPI-TYP-UINT
ZDSK-TKN-LOGICAL-PATH-CMN token-type ZSPI-TYP-UINT
Event-Message Text
Power On
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message.
Value is ZDSK-EVT-PON-CMN (-1020).
ZEMS-TKN-XLDEVNAME Subject token that specifies the logical device name
of the affected disk drive.
Token Description
ZEMS-TKN-LDEVNUMBER The logical device number of the affected disk drive.
ZDSK-TKN-LOGICAL-PATH-CMN Logical path command of the event.