NonStop Operating System Event Management Programming Manual

Disk Process Event Messages (ZDSK)
HP NonStop Operating System Event Management Programming Manual—520372-020
11-39
Messages
-1021: ZDSK-EVT-INT-TIMEOUT-CMN
An execute I/O (EIO) was issued, but no interrupt was received for the EIO; a timeout
on the EIO did not occur. The interrupt from the controller never occurred, or the
interrogate I/O (IIO) processing the interrupt failed. A problem exists with the channel
or the controller.
Unconditional Tokens
Subject: ZEMS-TKN-XLDEVNAME
Potentially critical event: No
Action event: No
Message sender: Disk process (ZDSK)
$ZLOG: Yes
$0: No
OSM/TSM collector: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-XLDEVNAME token-type ZSPI-TYP-STRING
ZDSK-TKN-COMMAND token-type ZSPI-TDT-UINT
ZDSK-TKN-SECTOR-COUNT token-type ZSPI-TYP-INT
ZDSK-TKN-SECTOR-ADDR-CMN token-type ZSPI-TYP-INT2
Conditional Tokens
ZEMS-TKN-LDEVNUMBER token-type ZSPI-TYP-UINT
ZDSK-TKN-LOGICAL-PATH-CMN token-type ZSPI-TYP-UINT
ZEMS-TKN-SAC-NAME token-type ZSPI-TYP-INT4
ZEMS-TKN-SCSI-TARGET-ID token-type ZSPI-TYP-INT4
ZEMS-TKN-SCSI-LUN token-type ZSPI-TYP-INT4
Event-Message Text
Interrupt Timeout
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message.
Value is ZDSK-EVT-INT-TIMEOUT-CMN (-1021).
ZEMS-TKN-XLDEVNAME Subject token that specifies the logical device name
of the affected disk drive.
ZDSK-TKN-COMMAND I/O command number for this event.
ZDSK-TKN-SECTOR-COUNT Sector count number.
ZDSK-TKN-SECTOR-ADDR-CMN Logical Block Address of the sector.