NonStop Operating System Event Management Programming Manual

Disk Process Event Messages (ZDSK)
HP NonStop Operating System Event Management Programming Manual—520372-020
11-87
Messages
5044: ZDSK-EVT-DP2DRVR-INTERNAL-ERR
The controller returned an invalid status response to the disk process.
Unconditional Tokens
Subject: ZEMS-TKN-LDEV
Potentially critical event: Yes
Action event: Yes
Message sender: Disk process (ZDSK)
TMDS collector: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-LDEV token-type ZSPI-TYP-UINT
ZDSK-TKN-PARM1 token-type ZSPI-TYP-INT
ZDSK-TKN-PARM2 token-type ZSPI-TYP-INT
ZDSK-TKN-PARM3 token-type ZSPI-TYP-INT
Event-Message Text
LDEV ldev CU %channel %unit %H
DP2 DRVR ERR parm1 parm2 parm3
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZDSK-EVT-
DP2DRVR-INTERNAL-ERR (5044).
ZEMS-TKN-LDEV Subject token that specifies the logical device number of the
affected disk drive.
ZEMS-TKN-PARM1 RIC status returned from the controller and the specific DP2
internal error encountered. The encoded RIC status (bits
<4:7> of ZEMS-TKN-PARM1) can be any value in
Table 11-24
). The DP2 internal error value (bits <8:15> of
ZEMS-TKN-PARM1) is decoded as in Table 11-25
on
page 11-88.
ZDSK-TKN-PARM2 Reserved for the vendor.
ZDSK-TKN-PARM3 Reserved for the vendor.
Table 11-24. ZEMS-TKN-PARM1 Values, Bits <4:7> (page 1 of 2)
Value
(Hexadecimal) Description
0 No error
1 Drive attention
2 Conditional success