NonStop Operating System Event Management Programming Manual

Disk Process Event Messages (ZDSK)
HP NonStop Operating System Event Management Programming Manual—520372-020
11-124
Messages
Unconditional Tokens
Cause. This message is preceded by event message ZDSK-EVT-NO-WORKPOOL-
SPACE (5079), which indicates that DP2 failed to allocate workpool space.
Effect. Requests to open or access files on the DP2 volume might incur allocation
errors (33 or 35).
Recovery. See Recovery Action Requiring Vendor Support on page 11-20.
5082: ZDSK-EVT-TERMINATED
A processor failed during DP2 volume initialization.
Unconditional Tokens
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZDSK-EVT-
WORKPOOL-USAGE (5080).
ZEMS-TKN-LDEV Subject token that specifies the logical device number of
the affected disk drive.
ZDSK-TKN-POOL-SIZE Occurs three times and specifies, in this order: the capacity
of the DP2 work pool, the maximum size of the pool, and
the amount of in-use space (all in kilobytes).
Subject: ZEMS-TKN-LDEV
Potentially critical event: Yes
Action event: No
Message sender: Disk process (ZDSK)
TMDS collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-LDEV token-type ZSPI-TYP-UINT
Event-Message Text
LDEV ldev ** ERROR **
DP2 volume initialization failed.
Volume must be stopped and restarted via SCF.
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZDSK-EVT-
TERMINATED (5082).
ZEMS-TKN-LDEV Subject token that specifies the logical device number of
the affected disk drive.