NonStop Operating System Event Management Programming Manual

Disk Process Event Messages (ZDSK)
HP NonStop Operating System Event Management Programming Manual—520372-020
11-128
Messages
Recovery. If this event is reported during a system or reload, the brother DP2
processor must be halted, dumped, and reloaded. If SCF support of DP2 is available,
the volume can be stopped and restarted.
If this message occurs after a system load or reload, see Recovery Action Requiring
Vendor Support on page 11-20.
5086: ZDSK-EVT-RESIZE-FAILED
DP2 received an error during an attempt to resize virtual memory segment space.
Unconditional Tokens
Cause. DP2 received an error during an attempt to resize virtual memory segment
space.
Effect. The DP2 volume is not accessible.
Recovery. System load or reload the primary and backup processors for the DP2
volume. If SCF) support of DP2 is available, the volume can be stopped and restarted.
If this message occurs after a system load or reload, see Recovery Action Requiring
Vendor Support on page 11-20.
Subject: ZEMS-TKN-LDEV
Potentially critical event: Yes
Action event: No
Message sender: Disk process (ZDSK)
TMDS collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-LDEV token-type ZSPI-TYP-UINT
ZDSK-TKN-ALL token-type ZSPI-TYP-INT
Event-Message Text
LDEV ldev ** ERROR **
DP2 cannot obtain space for segment.
RESIZESEGMENT error is n
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZDSK-EVT-
RESIZE-FAILED (5086).
ZEMS-TKN-LDEV Subject token that specifies the logical device number of
the affected disk drive.
ZDSK-TKN-ALL RESIZESEGMENT error number.