NonStop Operating System Event Management Programming Manual

Disk Process Event Messages (ZDSK)
HP NonStop Operating System Event Management Programming Manual—520372-020
11-135
Messages
Recovery. Initiate a RECEIVEDUMP command with the ONLINE option for the
affected DP2 processor, if possible. After the online dump is complete, use the PUP
UP command (D-series NonStop operating system RVUs) or SCF START command
(G-series and H-series NonStop operating system RVUs) to bring up the affected DP2
processor, which resets the state of the processor.
5094: ZDSK-EVT-NO-FLAT-SEGMENTS
DP2 failed to obtain virtual segment space because of a software incompatibility.
Unconditional Tokens
Cause. DP2 volume initialization failed to obtain virtual memory space because of
software incompatibility.
Effect. The volume is not accessible.
Recovery. See Recovery Action Requiring Vendor Support
on page 11-20.
Subject: ZEMS-TKN-LDEV
Potentially critical event: Yes
Action event: No
Message sender: Disk process (ZDSK)
TMDS collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-LDEV token-type ZSPI-TYP-UINT
Event-Message Text
LDEV ldev
DP2 Version is incompatible with the OS software version.
An attempt to allocate a flat segment failed.
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZDSK-EVT-NO-
FLAT-SEGMENTS (5094).
ZEMS-TKN-LDEV Subject token that specifies the logical device number of
the affected disk drive.