NonStop Operating System Event Management Programming Manual

Disk Process Event Messages (ZDSK)
HP NonStop Operating System Event Management Programming Manual—520372-020
11-160
Messages
Recovery. Retry the operation. See the SCF Reference Manual for the Storage
Subsystem for information about changing this parameter.
5119: ZDSK-EVT-CONFIG-RECORD-FETCH
When a DP2 process initialized, it tried and failed to read its configuration record from
the SCF configuration database.
Unconditional Tokens
Cause. When a DP2 process initialized, it tried and failed to read its configuration
record from the SCF configuration database.
Effect. The DP2 process cannot read its configuration record, so it will use default
values for all configuration parameters.
Recovery. If using the default values is not acceptable, fix the problem with the SCF
configuration database and restart the DP2 process. Some parameters are
reconfigurable online. See the SCF Reference Manual for the Storage Subsystem for
information about changing these parameters.
Subject: ZEMS-TKN-LDEVNUMBER
Potentially critical event: No
Action event: No
Message sender: DP2 File Manager
TMDS collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-LDEVNUMBER token-type ZSPI-TYP-UINT
ZDSK-TKN-PARM1-INT32(1)
ZDSK-TKN-PARM1-INT32(2)
Event-Message Text
DP2 is unable to locate CONFIG record. Config_Record_Fetch2_
error is parm1, detail parm2. Default configuration values
will be used.
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZDSK-EVT-ZDSK-
EVT-CONFIG-RECORD-FETCH (5119).
ZEMS-TKN-LDEVNUMBER Subject token that specifies the logical device number of
the affected disk drivE.
ZDSK-TKN-PARM1-INT32(1) Configuration parameter.
ZDSK-TKN-PARM1-INT32(2) Configuration parameter.