NonStop Operating System Event Management Programming Manual

Disk Process Event Messages (ZDSK)
HP NonStop Operating System Event Management Programming Manual—520372-020
11-162
Messages
5123: ZDSK-EVT-STT-UPDATE-FAILED
An attempt by the DP2 Driver to add an entry to the Spare Tracks Table (STT) failed
because of an I/O error.
Unconditional Tokens
Cause. The likely cause is a defective disk drive.
Effect. The new entry is not added to the STT.
Recovery. Consider replacing the disk drive as soon as is reasonable.
Subject: ZEMS-TKN-LDEV
Potentially critical event: No
Action event: Yes
Message sender: DP2 Driver
TMDS collector: Yes
OSM/TSM collector: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-LDEV token-type ZSPI-TYP-UINT
ZDSK-TKN-STT-UPDATE-FAILED token-type ZSPI-TYP-ENUM
ZDSK-TKN-SECTOR-ADDR-CMN token-type ZSPI-TYP-INT2
Event-Message Text
STT update failed
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZDSK-EVT-
STT-UPDATE-FAILED (5123).
ZEMS-TKN-LDEV Subject token that specifies the logical device number
of the affected disk drive.
ZDSK-TKN-STT-UPDATE-FAILED Internal driver status (useful only to HP).
ZDSK-TKN-SECTOR-ADDR-CMN Sector that the DP2 Driver was attempting to add to
the STT.