NonStop Operating System Event Management Programming Manual

HP NonStop Operating System Event Management Programming Manual—520372-020
15-1
15
XIO Subsystem Event Messages
(ZXIO)
XIO subsystem event messages are reported to the EMS by:

XIO monitor (XIOMON)

Process invoking XIO library call XioColoradoPktConfig()

Process invoking XIO library call XioEvtInfo()

Process invoking the XIO procedure XioEvtBadRc()

Process invoking the XIO procedure XioPktConfig()
Table 15-1. XIO Subsystem Event Messages (page 1 of 2)
Event Number and Symbolic Name Description
100: ZXIO-EVT-ADAPTER-REC-NOT-FOUND
There is no corresponding adapter record
in CONFIG.
101: ZXIO-EVT-SAC-REC-NOT-FOUND
There is no corresponding SAC record in
CONFIG.
102: ZXIO-EVT-CONFIG-MISMATCH
There is a mismatch between CONFIG and
the hardware inventory information.
103: ZXIO-EVT-INSTALL-DEV-FAIL
The installation of a ServerNet device
handle failed.
104: ZXIO-EVT-SET-SNETID-FAIL
An attempt to set a ServerNet ID with a
ServerNet device handle failed.
105: ZXIO-EVT-PKT-SETUP-TIMEOUT
The XIO monitor (XIOMON) timed out on
an ICEPACK setup request.
106: ZXIO-EVT-MT-CREATE-FAIL
An attempt to expand the module table
failed.
107: ZXIO-EVT-PKT-SETUP-FAIL
The XIOMON failed to complete an
ICEPACK setup request.
108: ZXIO-EVT-SLM-ERROR
A request to acquire a lock on the adapter
failed because of a SCSI Lock Manager
error.
109: ZXIO-EVT-COLORADO-CFG-ERROR
A request to read from or write to Colorado
SRAM failed using the specified Servernet
path.
110: ZXIO-EVT-INFORMATIONAL
An informational message used by software
development to capture the current
processing state.
111: ZXIO-EVT-CFG-BADRC
A CONFIG request to retrieve hardware
information for the adapter in
Group/Module/Slot failed.