NonStop Operating System Event Management Programming Manual

Nonstop Operating System Message System Event
Messages (ZIPC)
HP NonStop Operating System Event Management Programming Manual—520372-020
16-9
NonStop Message System (ZIPC-) Definitions
Table 16-8. ZIPC-DDL-SIB-TYPE Values
Value Meaning
ZIPC-ENM-NO-SIB The SIB contains no send information.
ZIPC-ENM-SEQ-SIB The SIB contains the request to write several data buffers
and a setup buffer that interrupts the problem processor.
ZIPC-ENM-GETDATA-SIB The SIB contains requests from the operating system to
read the memory of the problem processor.
ZIPC-ENM-READLINK-SIB The SIB contains requests from the operating system to
read the memory of the problem processor.
ZIPC-ENM-BARRIER-SIB The SIB contains the request to send a barrier transaction
to the problem processor.
ZIPC-ENM-BROADCAST-SIB The SIB contains the request intended for multiple
destination processors. Used for “I’m alive”, REGROUP,
and power fail shout packets.
ZIPC-ENM-UNSEQ-SIB The SIB contains the request to write a packet that will
interrupt the problem processor.
Figure 16-7. ZIPC-TYP-PATH-REASON Definition
ZIPC-TYP-PATH-REASON value is ZSPI-TDT-ENUM
def is ZIPC-DDL-PATH-REASON.
def ZIPC-DDL-PATH-REASON type enum
Table 16-9. ZIPC-DDL-PATH-REASON Values (page 1 of 2)
Value Meaning
ZIPC-ENM-CPUUP A processor has started running.
ZIPC-ENM-BARRIER-TIMEOUT A barrier transaction timed-out on the path.
ZIPC-ENM-BARRIER-FAILURE A barrier transaction failed along a path.
ZIPC-ENM-BARRIER-SUCCESS A barrier transaction succeeded along a path that
previously had a barrier failure.
ZIPC-ENM-PROBE-FAILURE Too many attempts to probe a path failed.
ZIPC-ENM-PROBE-SUCCESS An attempt to probe a path that was down was
successful.
ZIPC-ENM-BTE-TIMEOUT The message system received too many BTE
timeouts along a path.
ZIPC-ENM-OP-DOWN An attempt for the reporting processor to use a
fabric to communicate to the problem processor
failed COMMAND