NonStop Operating System Event Management Programming Manual

Nonstop Operating System Message System Event
Messages (ZIPC)
HP NonStop Operating System Event Management Programming Manual—520372-020
16-18
Messages
Unconditional Tokens
Conditional Token
Cause. An error might have occurred in the routing tables of the ServerNet network.
Effect. The reporting processor ignores the packet.
If the ServerNet routing tables are not reliable, then it is possible that the reporting and
problem processors will not be able to communicate. The message system will detect
the problem and, if both the processors are in the same system, causes one of the
involved processors to halt.
Recovery. This is an informational message only; no corrective action is needed
unless a processor halts. If a processor does halt, Recovery Action Requiring Vendor
Support on page 16-12.
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZIPC-EVT-
DET-BAD-DID-PKT-RCVD (103).
ZIPC-TKN-REPORTING-CPU Processor number of the processor on which the error
was detected.
ZIPC-TKN-PROBLEM-CPU Subject token that specifies the processor in which the
message originated.
ZIPC-TKN-PATH Fabric over which the message was transmitted.
ZIPC-TKN-TR-TYPE Type of ServerNet transaction being attempted.
ZIPC-TKN-SNET-ADDR-USED Target ServerNet address in the packet.
ZIPC-TKN-BYTE-COUNT-USED Length of the packet received, in bytes.
ZIPC-TKN-DEST-FIELD-ADDR ServerNet address of the intended destination
processor.
Token Description
ZIPC-TKN-PROBLEM-NODE Node number of the node containing the problem
processor. This is an optional token and is not passed on if
the reporting and problem processors are in the same
(local) node.