NonStop Operating System Event Management Programming Manual

Nonstop Operating System Message System Event
Messages (ZIPC)
HP NonStop Operating System Event Management Programming Manual—520372-020
16-22
Messages
Unconditional Tokens
Conditional Token
Cause. The message system has resumed using a path from the reporting processor.
Generally this event occurs when a processor comes up or when an operator sends a
SCF command to bring up the fabric.
Effect. The indicated processors might resume communication via the restored path.
Recovery. This is an informational message only; no corrective action is needed.
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-ENUM
ZIPC-TKN-REPORTING-CPU token-type ZSPI-TYP-UINT
ZIPC-TKN-PROBLEM-CPU token-type ZSPI-TYP-UINT
ZIPC-TKN-PATH token-type ZSPI-TYP-ENUM
ZIPC-TKN-PATH-REASON token-type ZSPI-TYP-ENUM
Conditional Token
ZIPC-TKN-PROBLEM-NODE token-type ZSPI-TYP-UINT
Event-Message Text
The path path from processor reporting-cpu to processor
problem-cpu, {in ServerNet node node-number,} was brought UP
due to path-reason.
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZIPC-EVT-
PATH-UP (111).
ZIPC-TKN-REPORTING-CPU. Processor number of the processor making this report
ZIPC-TKN-PROBLEM-CPU Subject token that specifies the processor at the other end
of the point-to-point connection.
ZIPC-TKN-PATH Fabric over which the message was transmitted.
ZIPC-TKN-PATH-REASON Reason that the path was brought down.
Token Description
ZIPC-TKN-PROBLEM-NODE Node number of the node containing the problem
processor. This is an optional token and is not passed if the
reporting and problem processors are in the same (local)
node.