NonStop Operating System Event Management Programming Manual

Nonstop Operating System Message System Event
Messages (ZIPC)
HP NonStop Operating System Event Management Programming Manual—520372-020
16-25
Messages
114: ZIPC-EVT-FABRIC-STILL-DOWN
The connection between the indicated processor and fabric has been down for over
ten minutes..
Unconditional Tokens
Cause. The processor has had no connection to the fabric for the duration displayed.
Effect. The processor is unable to communicate with other system components over
the indicated fabric.
Recovery. If the fabric is down because of:

A hardware problem—correct the problem then bring the fabric up using the SCF
START SERVERNET command.

An operator (SCF) command—bring the fabric up using the SCF START
SERVERNET command.
Subject: ZIPC-TKN-PROBLEM-CPU
Potentially critical event: Yes
Action event: Yes
Message sender: Monitor process
TMDS collector: Yes
OSM/TSM collector: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-ENUM
ZIPC-TKN-REPORTING-CPU token-type ZSPI-TYP-UINT
ZIPC-TKN-PATH token-type ZSPI-TYP-ENUM
ZIPC-TKN-PATH-REASON token-type ZSPI-TYP-ENUM
ZEMS-TKN-EMPHASIS token-type ZSPI-TYP-BOOLEAN
Event-Message Text
OPERATOR ATTENTION NEEDED.
Connectivity on the path fabric of processor reporting-cpu is
still down due to path-reason.
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZIPC-EVT-
FABRIC-STILL-DOWN (114).
ZIPC-TKN-REPORTING-CPU Processor number of the processor that has no connectivity
to the fabric.
ZIPC-TKN-PATH Fabric to which the reporting processor cannot connect.
ZIPC-TKN-PATH-REASON Reason that connectivity was lost.
ZEMS-TKN-EMPHASIS Always true for this event.