NonStop Operating System Event Management Programming Manual

Nonstop Operating System Message System Event
Messages (ZIPC)
HP NonStop Operating System Event Management Programming Manual—520372-020
16-26
Messages
115: ZIPC-EVT-SUPPRESS-MSG
Logging of PATH-DOWN and PATH-UP (events 110 and 111) for the indicated path is
temporarily suspended because the events are occurring too frequently.
Unconditional Tokens
Conditional Token
Cause. There have been excessive path transitions.
Subject: ZIPC-TKN-PROBLEM-CPU
Potentially critical event: No
Action event: No
Message sender: Monitor process
TMDS collector: Yes
OSM/TSM collector: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-ENUM
ZIPC-TKN-REPORTING-CPU token-type ZSPI-TYP-UINT
ZIPC-TKN-PROBLEM-CPU token-type ZSPI-TYP-UINT
ZIPC-TKN-PATH token-type ZSPI-TYP-ENUM
Conditional Token
ZIPC-TKN-PROBLEM-NODE token-type ZSPI-TYP-UINT
Event-Message Text
Event logging for the path path from processor reporting-cpu
to processor problem-cpu {in ServerNet node node-number}, is
suppressed due to excessive path state transitions.
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZIPC-EVT-
SUPPRESS-MSG (115).
ZIPC-TKN-REPORTING-CPU Processor number of the processor making this report.
ZIPC-TKN-PROBLEM-CPU Subject token that specifies the processor at the other end
of the point-to-point connection.
ZIPC-TKN-PATH Fabric over which the message was transmitted.
Token Description
ZIPC-TKN-PROBLEM-NODE Node number of the node containing the problem
processor. This is an optional token and is not passed if the
reporting and problem processors are in the same (local)
node.