NonStop Operating System Event Management Programming Manual

Nonstop Operating System Message System Event
Messages (ZIPC)
HP NonStop Operating System Event Management Programming Manual—520372-020
16-36
Messages
Unconditional Tokens
Conditional Tokens
Cause. A summary of NACKs encountered on the indicated path are logged.
Effect. None, the summary is simply logged periodically.
Recovery. This is an informational message only; no corrective action is needed.
Event-Message Text
Nacks received on the path path by processor reporting-cpu
from processor problem-cpu {in ServerNet node node-number}.
Details of the error counts are:
{Unsupported pkt type: count}
{Unsupported pkt length: count}
{Bad ServerNet address mask: count}
{Bad ServerNet source: count}
{AVT access error: count}
{Bad Interrupt: count}
{Interrupt to full Queue: count}
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZIPC-EVT-NACK-
RCVD (125).
ZIPC-TKN-REPORTING-CPU Processor number of the processor making this report.
ZIPC-TKN-PROBLEM-CPU Subject token that specifies the processor at the other end
of the point-to-point connection.
ZIPC-TKN-PATH Fabric on which the negative acknowledgements occurred.
Token Description
ZIPC-TKN-UNSUP-PKT-TYPE Number of unsupported packet type errors detected.
ZIPC-TKN-UNSUP-PKT-LENGTH Number of unsupported packet length errors detected.
ZIPC-TKN-BAD-MASK Number of bad ServerNet address mask errors
detected.
ZIPC-TKN-BAD-SOURCE Number of bad ServerNet source errors detected.
ZIPC-TKN-ACCESS-ERROR Number of AVT access errors that occurred.
ZIPC-TKN-BAD-INTERRUPT Number of bad interrupts that occurred.
ZIPC-TKN-INT-TO-FULL-Q Number of ServerNet interrupts that occurred while the
queue was full.
ZIPC-TKN-PROBLEM-NODE Node number of the node containing the problem
processor. This is an optional token and is not passed if
the reporting and problem processors are in the same
(local) node.