NonStop Operating System Event Management Programming Manual
Nonstop Operating System Message System Event 
Messages (ZIPC)
HP NonStop Operating System Event Management Programming Manual—520372-020
16-41
Messages
Conditional Tokens
ZIPC-TKN-R10K-LOGSPECWRITE Number of occurrences of this event since the last 
time one was logged.
ZIPC-TKN-R10K-LIFESPECWRITE Number of occurrences of this event. in this 
processor, since the system was loaded.
Token Description (page 1 of 2)
ZIPC-TKN-R10K-LOGALTBUFSWOK Number of times message transmission 
successfully used the alternate buffer (because 
an error occurred in the primary buffer) since the 
last time an occurrence of this event was 
logged.
ZIPC-TKN-R10K-LIFEALTBUFSWOK Number of times message transmission 
successfully used the alternate buffer (because 
an error occurred in the primary buffer) since the 
reporting processor was loaded or reloaded.
ZIPC-TKN-R10K-LOGALTBUFSWFAIL Number of times the message system was 
unable to switch to the alternate buffer (after 
detecting a speculative write error in the primary 
buffer) since the last time an occurrence of this 
event was logged.
ZIPC-TKN-R10K-LIFEALTBUFSWFAIL Number of times the message system was 
unable to switch to the alternate buffer (after 
detecting a speculative write error in the primary 
buffer) since the reporting processor was loaded 
or reloaded.
ZIPC-TKN-R10K-FAILBUFADDR Address of the buffer in which the speculative 
write error was detected.
ZIPC-TKN-R10K-FAILBUFTYPE Type of buffer in which the speculative write 
error was detected. See Common Definitions
 on 
page 16-3 for information on specific buffers 
where the write failure might have occurred.
ZIPC-TKN-R10K-SOURCENODE. Node number of the node where the message 
that experienced the failure originated
ZIPC-TKN-R10K-SOURCECPU Processor number of the processor where the 
message that experienced the failure originated.
ZIPC-TKN-R10K-PIN First occurrence: Process identifier of the 
process that originated the message.
Second occurrence: Process identifier 
message’s destination process.
ZIPC-TKN-R10K-INTERNALDATA Internal message system data intended to assist 
in the debugging.
Token Description (page2of2)










