NonStop Operating System Event Management Programming Manual

NonStop C-Base Multitasking Engine (NSC) Event
Messages (ZNSC)
HP NonStop Operating System Event Management Programming Manual—520372-020
18-13
Messages
Cause. An error was returned from the PROCESS_LAUNCH_ procedure, so NSC
was unable to create a backup process. This could be because of a logical error in the
process, or it could be because of a problem in the process’s environment, such as a
problem with the processor in which NSC attempted to create the backup process.
Effect. No backup process is created. NSC retries the operation. If the problem
persists, the process using NSC continues without trying to create a backup process.
Recovery. Determine the cause of the problem and restart the reporting process. If
the problem appears to be a logical error in the process, see Recovery Action
Requiring Vendor Support on page 18-7.
7: ZNSC-EVT-BKP-CREATED
A backup process was successfully created.
ZNSC-TKN-FILE-ERROR File error returned from the PROCESS_LAUNCH_
procedure.
ZNSC-TKN-ERROR-DETAIL Error detail information returned from the
PROCESS_LAUNCH_ procedure.
Subject: ZNSC-TKN-PROC-NAME
Potentially critical event: No
Action event: No
Message sender: Processes using NSC
TMDS collector: No
OSM/TSM collector: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZNSC-TKN-PROC-NAME token-type ZSPI-TYP-STRING
ZNSC-TKN-CPU token-type ZSPI-TYP-UINT
Event-Message Text
Backup process created in processor cpu,
Token Description (page2of2)