NonStop Operating System Event Management Programming Manual

SCSI Module Driver Event Messages (ZSMD)
HP NonStop Operating System Event Management Programming Manual—520372-020
20-5
Event Management Service (EMS) Standard
Definitions
Event Management Service (EMS) Standard Definitions
EMS standard definitions that have a specific meaning for ServerNet error handler
events are listed in Table 20-3.
EMS standard definitions are described in detail in the EMS Manual.
SCSI Module Driver (ZSMD-) Definitions
SCSI module driver definitions begin with ZSMD- and are found in the source-definition
files ZSMDTAL, ZSMDCOB, ZSMDTACL, ZSMDDDL, ZSMDCC, and ZSMDPAS.
These definitions are described in this section.
Topics:

Additional Status Tokens on page 20-6
Token Description
ZSPI-TKN-SSID Contains ZSMD-VAL-SSID, the subsystem ID of the SCSI module
driver.
ZSPI-SSN-ZSMD Subsystem number assigned to the SCSI module driver.
Table 20-3. EMS Standard Definitions Used in SCSI Module Driver Event
Messages
Header Tokens Other Simple Tokens
ZEMS-TKN-CPU
ZEMS-TKN-EMPHASIS
ZEMS-TKN-EVENTNUMBER
ZEMS-TKN-GENTIME
ZEMS-TKN-LOGTIME
ZEMS-TKN-PIN
ZEMS-TKN-PROC-DESC
ZEMS-TKN-USERID
ZEMS-TKN-ACTION-NEEDED
ZEMS-TKN-LDEV
ZEMS-TKN-TEXT
Token Description
ZEMS-TKN-ACTION-NEEDED Occurs in event message pairs. The first message
indicates that operation intervention is needed (ZSPI-VAL-
TRUE), and the second message indicates that operator
intervention is completed (ZSPI-VAL-FALSE).
ZEMS-TKN-EMPHASIS Has the value ZSPI-VAL-TRUE for those SCSI module
driver event messages that are potentially critical.
Otherwise, it always has the value ZSPI-VAL-FALSE.
ZEMS-TKN-EVENTNUMBER Event number for each SCSI module driver event
message.