NonStop S-Series Hardware Installation and FastPath Guide (G06.25+)

Installing, Starting, and Testing a System Console

HP NonStop S-Series Hardware Installation and FastPath Guide—529443-001

5-2

Unpacking and Assembling a System Console

This subsection describes how to unpack and assemble system console components.

The instructions direct you to unpack all equipment before connecting components.

Installation Quick Reference

If you are already familiar with installing system consoles, use the system console

tasks in Section E, FastPath Tasks: Required as a checklist. If you are not installing a

system console in the setup configuration (where one system console manages one

system), go to Section 10, Configuring the System, for the appropriate connection

procedure.

Finding Documentation

Documentation is available in the NonStop Technical Library (NTL). For the location of

NTL, see Where to Get More Information on page xxiii.

Finding the Quick Setup Reference Card

Look for the quick setup reference card as you unpack the system console hardware

and software. This reference card is included in the accessories box and contains an

up-to-date illustration of the back panel for your model of the system console. The

reference card shows the location of connectors.

Unpacking the System Console

PCs provided by HP to be used as system consoles come preloaded with the client

components necessary to use OSM software (TSM client components can be

installed), but some assembly of components is required. Hardware and software are

delivered in various shipping boxes containing the components listed in Table 5-1 on

page 5-3. Some hardware is optional, so your shipment might not contain all items

listed.

Save all shipping boxes and packing material so you can repack components for

shipment if necessary.

Topic Page

Installation Quick Reference

5-2

Finding Documentation 5-2

Finding the Quick Setup Reference Card 5-2

Unpacking the System Console 5-2

Assembling the System Console 5-6