NonStop S-Series Hardware Installation and FastPath Guide (G06.25+)

Connecting a System Console
HP NonStop S-Series Hardware Installation and FastPath Guide—529443-001
6-3
System Console Connection to a LAN
System Console Connection to a LAN
A network interface card (NIC) inside the system console connects the workstation to a
dedicated LAN (connect a port on the NIC to an Ethernet switch or hub).
The quick setup reference card included with the workstation shows the location of this
port at the back of the system console.
Ethernet Cables
To make Ethernet connections for a dedicated LAN, use Category 5 unshielded twisted
pair (UTP) 10Base-T cables with RJ-45 connectors.
Figure 6-1. Processor Enclosure PMF CRU Ethernet Ports
Ethernet Port
VST525.vsd