NonStop S-Series Hardware Installation and FastPath Guide (G06.25+)

FastPath Tasks: Optional
HP NonStop S-Series Hardware Installation and FastPath Guide—529443-001
F-16
2. On the NonStop K-Series Server
2. On the NonStop K-Series Server
2a. Obtain TCP/IP Information
1. Log on to the NonStop K-series server using the super ID and enter the correct
password at the Password prompt:
> logon super.super
Password: password
2. At the TACL prompt, start SCF:
> SCF
3. Determine the name of the NonStop TCP/IP process you associated with the
Expand-over-IP line-handler process on the NonStop K-series server:
-> LISTDEV TCPIP
Example F-5 shows an SCF LISTDEV TCPIP display. Important information is
highlighted in boldface type.
4. The NonStop TCP/IP process you select must have an Ethernet subnet configured.
List the subnets configured for a particular NonStop TCP/IP process:
-> INFO SUBNET $tcpip-process-name.*
Example F-6
shows an SCF INFO SUBNET display. Ethernet subnets are
identified by the word ETHERNET in the TYPE field. Important information is
highlighted in boldface type.
5. Record the name of the NonStop TCP/IP process you selected (shown in the
Name field in the SCF LISTDEV display) in the tcpip_process field in the COUP
Worksheet.
Example F-5. SCF LISTDEV TCPIP Display
LDev Name PPID BPID Type RSize Pri Program
124 $ZTC2 4,43 7,28 (48,0) 32000 200 \JOHN.$SYSTEM.ZTCPIP.TCPIP
716 $ZTC0 4,39 7,36 (48,0 ) 32000 150 \JOHN.$SYSTEM.ZTCPIP.TCPIP
723 $ZTC1 9,28 8,33 (48,0 ) 32000 150 \JOHN.$SYSTEM.ZTCPIP.TCPIP
740 $ZTC3 5,12 6,33 (48,0 ) 32000 150 \JOHN.$SYSTEM.ZTCPIP.TCPIP
749 $ZTC10 4,45 5,38 (48,0 ) 32000 150 \JOHN.$SYSTEM.ZTCPIP.TCPIP
1148 $ZTCS0 12,46 13,71 (48,0 ) 32000 150 \JOHN.$SYSTEM.ZTCPIP.TCPIP
1633 $ZTCS2 12,79 13,70 (48,0 ) 32000 150 \JOHN.$SYSTEM.ZTCPIP.TCPIP
Example F-6. SCF INFO SUBNET Display
TCPIP Info SUBNET \JOHN.$ZTC10.*
Name Devicename *IPADDRESS TYPE *SUBNETMASK SuName QIO *R
#LOOP0 \NOSYS.$NOIOP 127.0.0.1 LOOP-BACK %HFF000000 OFF N
#EN0 \JOHN.$LAM12 155.186.70.123 ETHERNET %HFFFFFC00 ON N