NonStop S-Series Hardware Installation and FastPath Guide (G06.25+)

Glossary
HP NonStop S-Series Hardware Installation and FastPath Guide—529443-001
Glossary-93
SBB
and the process terminates abnormally. Other debuggers can create a save file but
refer to the result as a process snapshot file.
SBB. See ServerNet buffer board (SBB).
SBI. See ServerNet bus interface (SBI).
SC. See Subscriber Channel (SC).
scalar view of the user ID. A view of the HP NonStop™ operating system user ID,
normally used in the Open System Services (OSS) environment, that is the value
(group-number * 256) + user-number. Also called the UID.
SCC. See serial communications controller (SCC).
SCF. See Subsystem Control Facility (SCF).
SCL. The mnemonic subsystem name for the ServerNet cluster subsystem.
SCP. See Subsystem Control Point (SCP).
SCSI. See small computer system interface (SCSI).
SCSI object type. The Subsystem Control Facility (SCF) object type for an Open SCSI
device.
SCSI passthrough terminator. A bus-terminating plug connected between a cable and the
external connector of a customer-replaceable unit (CRU). The SCSI passthrough
terminator contains the necessary termination resistors required by the SCSI bus. See
also terminator.
SCSI plug-in card (S-PIC). A plug-in card (PIC) for the 6760 ServerNet device adapter
(ServerNet/DA) that uses a small computer system interface (SCSI) interface to
connect devices to an HP NonStop™ S-series system. See also plug-in card (PIC)
and
fiber-optic plug-in card (F-PIC)
.
SCSI ServerNet addressable controller (S-SAC). A ServerNet addressable controller
(SAC) that is contained within a small computer system interface (SCSI) plug-in card
(S-PIC).
SCSI terminator. See terminator.
SDK. See Software Developers Kit (SDK).
SE. System engineer. See service provider.
searchList. For each loadfile, a list that is constructed and used by the linker and loader to
tell them which libraries to examine, and in which order, to locate symbol definitions
needed by that loadfile. The linker and loader construct the loadfile’s searchList in
accordance with that loadfile’s import control, which is set at link time by the loadfile’s