NonStop S-Series Hardware Installation and FastPath Guide (G06.25+)

Introduction
HP NonStop S-Series Hardware Installation and FastPath Guide—529443-001
1-32
Installation Overview
IOAM Configuration Requirements
Installing IOAM enclosures on your NonStop S-series system includes the following
requirements:
•
You must install the IOAM enclosure as group 11, 12, 13, 14, or 15.
•
The presence of an IOAM enclosure in your system requires that certain other
groups be left empty. If you have I/O enclosures in these groups, you must remove
them.
If necessary, remove I/O enclosures from your system as follows:
To add an IOAM enclosure as group ...
You must remove any I/O enclosures in
groups ...
11 21, 31, 41
12 22, 32, 42
13 23, 33, 43
14 24, 34, 44
15 25, 35, 45