NonStop S-Series Hardware Installation and FastPath Guide (G06.25+)

HP NonStop S-Series Hardware Installation and FastPath Guide—529443-001
3
6. Connecting a System Console
Installation Quick Reference 5-2
Finding Documentation 5-2
Finding the Quick Setup Reference Card 5-2
Unpacking the System Console 5-2
Assembling the System Console 5-6
Starting and Testing a System Console 5-8
Powering On a System Console 5-8
Verifying Readiness 5-9
Final Setup Steps 5-9
Operational Considerations for OSM and TSM 5-10
Connecting Multiple System Consoles 5-11
System Console Function Keys 5-12
6. Connecting a System Console
The Dedicated LAN 6-2
Server Connection to a LAN 6-2
System Console Connection to a LAN 6-3
Ethernet Cables 6-3
Ethernet Switch Ports 6-4
Installing Ferrite Cores 6-4
Installing the Ethernet Switch or Hub 6-4
Connect the Ethernet Switch or Hub to the Server 6-5
Connect the System Console to the Ethernet Switch or Hub 6-6
7. Installing External System Devices
Installing Tape Drives 7-1
Installing a 5175 Open-Reel Tape Subsystem 7-2
Installing a 519x Cartridge Tape Subsystem 7-9
Installing Other Tape Devices 7-12
Attaching a Tape Drive to the NonStop S-Series Server 7-14
Installing a SWAN or SWAN 2 Concentrator 7-15
Installing an AWAN Server 7-15
Installing Printers and Terminals 7-16
8. Powering On and Starting the System
Starting a System for the First Time 8-2
Startup Checklist 8-2
Powering On External System Devices 8-3
Powering On the Primary System Console and Modem 8-3
Powering On the Tape Subsystem 8-3