NonStop S-Series Hardware Installation and FastPath Guide (G06.25+)

Contents

HP NonStop S-Series Hardware Installation and FastPath Guide—529443-001

12. Online Configuration Tasks (continued)

2. Verify That the Target Disk Is Present 12-12

3. Stop Access to the Target Disk and Display Its Status 12-12

4. Change the Label of the Target Disk 12-13

5. Create a New System Volume and a System Image Tape (SIT) 12-14

6. Install the Boot Millicode on the Target Disk 12-14

7. Verify the Installation of Boot Millicode on the Target Disk 12-15

8. Copy Subvolumes to the Target Disk 12-16

Create a Command File 12-17

13. Creating Startup and Shutdown Files

Automating System Startup and Shutdown 13-2

Startup 13-2

Shutdown 13-2

For More Information 13-2

Processes That Represent the System Console 13-3

$YMIOP.#CLCI 13-3

$YMIOP.#CNSL 13-3

$ZHOME 13-3

$ZHOME Alternative 13-4

Example Command Files 13-5

CIIN File 13-6

Establishing a CIIN File 13-6

Modifying a CIIN File 13-7

If a CIIN File Is Not Specified or Enabled in OSM or TSM 13-7

Example CIIN Files 13-8

Tips for Startup Files 13-9

How Process Persistence Affects Configuration and Startup 13-9

Startup File Examples 13-10

System Startup File 13-10

Spooler Warm-Start File 13-12

TMF Warm-Start File 13-12

TCP/IP Stack Configuration and Startup File 13-12

CP6100 Lines Startup File 13-15

ATP6100 Lines Startup File 13-15

X.25 Lines Startup File 13-15

Printer Line Startup File 13-16

Expand-Over-IP Line Startup File 13-16

Expand Direct-Connect Line Startup File 13-16