NonStop S-Series Hardware Installation and FastPath Guide (G06.26+)

HP NonStop S-Series Hardware Installation and FastPath Guide—529876-001
5
11. Offline Configuration Tasks
Add a Server to the Cascading Ethernet Switches 10-13
Unattended Site Configuration 10-14
Create the Unattended Site Configuration 10-15
Add a Server to an Unattended Site Configuration 10-15
Nondedicated (Public) LAN Configuration 10-16
Construct a Nondedicated (Public) LAN Configuration 10-16
11. Offline Configuration Tasks
Changes That Must Be Made Offline 11-1
Application Reconfiguration 11-2
Installing a New RVU 11-2
Installing a Product Revision 11-2
Changing System Name, System Number, or Time Attributes 11-3
Changing the System Topology 11-3
Changing the CONFTEXT File 11-3
12. Online Configuration Tasks
SCF 12-2
Initial CONFIG file 12-2
Subsystems in G-Series RVUs 12-3
Generic Processes 12-4
Making Important Processes Persistent 12-5
Types of System Configuration Files 12-6
KMSF 12-8
Initial Configuration of KMSF Swap Files 12-8
Changing the Configuration of KMSF Swap Files 12-8
KMSF and the Operations Environment 12-8
The OSM and TSM Packages 12-9
Creating an Alternate System Disk 12-10
1. Choose the Target Disk and Plan Its Space and Files 12-11
2. Verify That the Target Disk Is Present 12-12
3. Stop Access to the Target Disk and Display Its Status 12-12
4. Change the Label of the Target Disk 12-13
5. Create a New System Volume and a System Image Tape (SIT) 12-14
6. Install the Boot Millicode on the Target Disk 12-14
7. Verify the Installation of Boot Millicode on the Target Disk 12-15
8. Copy Subvolumes to the Target Disk 12-16
Create a Command File 12-17
13. Creating Startup and Shutdown Files